Laser

A kit specifically designed to set the balance shafts on the BMW engines when the balance shafts have been disturbed.Applications: BMW engine codes...

Designed specifically for the 2.0L Twin Spark engines with the engine codes listed. Designed to allow the required tension to be applied to the bal...

Designed specifically to lock the balance shaft fitted to the Honda 1.8L, 2.0L, 2.2L & 2.3L petrol engines found across the Honda range from 19...

The 7253 is made up of the tools required to remove, replace and time the balance shaft on the BMW 1.5 diesel, 1.2 & 1.5 petrol engines. Laser ...

Extra long 1/2"D ball end Hex bit suitable for sump bolts on Volkswagen T4.Applications: Volkswagen sump bolts as fitted to T4 5 cylinder engines (...

1/4"D ball end Hex bit socket, designed for removing/installing the engine speed sensor on VAG engines.For removing/installing engine speed sensor ...

A Hex key set 2.5mm to 10mm with ball end for improved access.Sizes: 2.5, 3, 4, 5, 6, 8 and 10mm.Ball end for greater access.Manufactured from Chro...

A set of short, ball end metric hex socket bits from 3mm to 10mm, provide greater access in confined spaces. Each of the sockets has a satin finish...

A set of ball end metric Hex 1/2"D sockets from 6mm to 19mm, provide greater access in confined spaces.1/2"D socket bits x 78mm long: 6, 8, 10, 12,...

A 100mm long, 1/2"D ball ended T40 Star* socket bit. Allows the bit to fit into fixing head at a 25 angle, to provide greater access in confined ar...

A set of long, ball ended metric socket bits in Hex, Star* and Spline profiles, allowing up to 25 each way, providing greater access in confined ar...

Commercial Vehicle Balljoint extractor for use on light trucks.Applications: BMW E39; Mercedes-Benz W203, W211, W210, W220, W221 and various other ...

Part of a range of vehicle specific tools, for the removal and fitting of bushes and ball joints, without having to remove suspension legs, subfram...

Designed to fit LGV and HGV ball joints. Supplied with 3 different length pressure pieces and a threaded adaptor which allows the use of a hydrauli...

This commercial Balljoint remover is useful on most trucks including MAN, Mercedes-Benz and Scania etc.Invaluable for removing the ball joints on t...

This three piece set is suitable for use in confined spaces and on a number of makes of vehicle including Audi, BMW, Ford, Chrysler, Opel, Saab, Vo...

For separating ball joints using the cup and screw method.Jaws: 22mm width, 20mm depth, maximum opening 50mm.Thrust nut for leverage.Manufactured f...

Designed to separate the straight link ball joint found on the Volvo FM12 and FH series HGV's. The special shaped body allows the tool to fit aroun...

Large sized fork and wedge type ball joint breaker, internal jaw size 35mm for larger ball joints as fitted to light commercials' and 4x4.Jaw width...

Hydraulic ball joint separator - 8 tonne capacity.Jaw size: 22mm (width), 30mm (depth); maximum opening: 56mm.Spindles maximum torque pressure 40Nm...

Designed to make separating ball-joints easy. The separator nuts are designed to screw on in place of the joint nut and bottom out on the end of th...

For separating ball joints this tool uses the scissor method.Jaw size: 30mm (width), 18mm (depth); maximum opening: 50mm.Removes ball pin housing o...

Scissor type heavy duty ball joint separator. For use on a wider range for track rod ends and anti-roll ball mountings and ball joints.Jaw size: 20...

The Volvo front ball joints are mounted in such a way that access is very tight for the use of traditional ball joint breakers. The Laser 8589 is s...