Thread & Bearing Tools

For easy removal of wheel bearings. Simply choose the correct size collet for the bearing and hammer one of the drifts into the allocated slot. Cov...

For use on M12 sumps where the thread has been stripped or worn.Contains: 1 x M13 x 1.5 tap, 6 drain plugs, 12 copper washers.Always use one size l...

Internal bearing puller suitable for the extraction of bearings that require pulling, not pressing, out.Diameter of adapters: 8, 10mm x 100mm; 12, ...

Assists the removal of small bearings for applications including alternators, generators, domestic appliances, power tools and pumps.Reach: 73mm.Sp...

Specially designed to repair damaged spark plug threads on modern engines. Unique design allows the tool to be passed through the plug thread into ...

Contains the four most common wheel bolt thread sizes. Suitable for cleaning and repairing damaged wheel hub threads, saving time and money. Use wi...

3-Jaw design applies even pressure preventing damage to bearings. Designed to remove bearings with 12-38mm internal diameter. Forged and heat treat...

Cast puller yoke with forged separator. Supplied with 10 Tonne hydraulic ram. Suitable for pulling commercial vehicle size bearings from 105-200mm....

Suitable for oxygen sensors found on most modern vehicles. Cut-out and slots enable sockets to be fitted over wiring harness. Includes two chasers ...

Master set of gear pullers and bearing separators supplied in storage case. Forged steel bearing separator. 10 Tonne Hydraulic ram compatible with ...

Drop-forged Chrome Vanadium steel puller arms with locking/gripping feature. Set includes three sets of 100mm triple leg pullers with locking featu...

Forged steel 3-way bearing separator and gear puller set. Operated with supplied 10 Tonne hydraulic ram or manual force screw. Features a selection...

Forged steel 2-way yoke allows twin or triple leg pulls. 10 Tonne Hydraulic power unit with tommy bar. Suitable for pulling hubs, flanges, gears an...

For use on M19 sumps where the thread has been stripped or worn.Contains 1 x M20 x 1.5 tap, 6 sump plugs and 12 copper washers.Always use one size ...

For use on M21 sumps where the thread has been stripped or worn.Contains 1 x M22 x 1.5 tap, 6 sump plugs and 12 copper washers.Always use one size ...

For use on M16 sumps where the thread has been stripped or worn.Contains: 1 x M17 x 1.5 tap, 6 drain plugs and 12 copper washers.Always use one siz...

For use on M14 sumps where the thread has been stripped or worn.Contains: 1 x M15 x 1.5 tap, 6 drain plugs and 12 copper washers.Always use one siz...

Wheel stud master re-threader kit for use on vehicles that use wheel boltsFor repairing damaged wheel stud threads internal and external on most pa...

For use on M12 sumps where the thread has been stripped or worn.Contains: one M13x1.25 tap, six M13x1.25 drain plugs and 12 copper washers.Always u...

Screw the appropriate guide into the sump and use the cutter to re-surface the seal area of the sump.Applications include: Alfa Romeo, Audi, Cadill...

Designed for the repair of damaged Lambda (oxygen) sensors threads.Set includes: 5 x thread repair inserts M18 x 1.5.M18 x 1.5 taper tap & M20 ...

Suitable for the installation and removal of front hub bearings without the need to dismantle the steering knuckle and strut assembly. Fast and sim...

Designed for the second generation of wheel bearing found on modern vehicles. These bearings are lightweight with an integral mounting flange. They...

Comprehensive kit of tools for the fast and effective removal and installation of wheel bearings on front-wheel drive vehicles. Reduces chances of ...