Cam & Valve Tools

Emergency Tyre KitComplete Tyre Repair Kit including 12V analogue air compressor, tyrepressure gauge, tread depth gauge, emergency puncture repair ...

This tool provides one holding tool which stops the camshaft pulley rotating and the socket tool to loosen and tighten the cam pulley retaining rin...

Designed to adjust valve clearance on Honda twin cam models.Applications: for use on Honda 4 cylinder twin cam models including CBX1000 from 1970 t...

Required when replacing timing belts or performing any cylinder head repair or maintenance work. Specifically designed for the 2 valve 620cc, 695, ...

Used to lock the camshafts in their timed position when replacing the cam belts and cam drive pulleys.Covers 3 valve models from 2005 to 2007.Size:...

The kit is designed to lock the camshafts on the Vauxhall engines listed in the applications provided. Plates are oversized to prevent the valve co...

Used to lock the camshafts in their timed position when engine repair or rebuild requires the cam pulleys to be removed and timed.Used to lock the ...

Includes a camshaft holding tool which is essential for holding the camshaft when checking the valve clearances, and a crankshaft front oil seal in...

Specialised socket for turning the inlet camshaft during engine timing chain repair operations. Suitable for VAG 1.8, 2.0 TFSi Generation III chain...

Suitable for belt tensioning the huge range of VAG 1.8/1.8T, 2.0 FSi/TFSi twin camshaft engines. These belt drive engines also have a chain in head...

Used in conjunction with Model No. VSE5911A Timing Kit - the kit provides the specialist tools for removal and installation of camshafts and disman...

Camshaft pulley alignment pins for Ford 2.0L diesels with engine code DW10F. Designed to lock the belt-driven camshaft pulley on the Ford 2.0L Dura...

This kit is designed to lock the camshaft of the 2.8L diesel engines used in the popular Volkswagen LT van. Use when checking and setting the valve...

This kit provides the essential clips and pins that allow the camshafts to be removed and fitted when working on the 1.8/2.0lt TFSi Turbocharged 4 ...

Camshaft VVT actuator wrench for BMW, used to replace leaking actuator seals or when the camshaft requires removal. The wrench is designed to latch...

Camshaft control valve removal tools, with innovative double sided design, for use on TFSI and TSI petrol engines to remove the camshaft control va...

This camshaft locking device simply slides between the 2 camshaft pulleys on 16 valve twin cam engines.Rover K series enginesOEM Toolcode 18G 1570M...

Aids the removal and replacement of cam followers on 8 valve engines.Applications: Vauxhall/Opel.Equivalent to OEM KM-565-A.Essential tool for cams...

For use on some European cars with overhead camshafts which use space shims.For use on overhead camshafts on European models including Opel, Vauxha...

For releasing and replacing the variator on Alfa Romeo vehicles.For releasing and replacing the variator.Specifically designed for the Alfa Romeo 1...

The valve spring compressor is used to free the camshaft from tension created by contact with the valves and enables correct tension to be applied ...

The Subaru flat four engines listed below have 4 camshafts (2 per side) and replacing timing belts can be challenging when working alone. The 7685 ...

Set of 5 camshaft adjustment tools in one kit. Equipped with square 3/8"D for the removal of 3- and 4-way central camshaft adjustment valves.Applic...