Clutch Tools

Designed to speed up and simplify the fitting of DSG clutch kits to GEN1 and GEN2 DSG transmission systems, the 7914 has been specifically designed...

Clutch centering tool designed to ensure the correct alignment of the clutch during installation suitable for use on MINI Clubman, Countryman, hatc...

The vehicles listed use a pull-type clutch release system, meaning the clutch fork pivot pin must first be removed before the transmission can be r...

Clutch seal remover and installer set for Ford Fiesta and Focus. NOTE: The removal of the seals requires the careful removal of the clutch pack. Fo...

To ensure correct clutch plate alignment on MINI models (2011 - 2016).Applications include: MINI Cooper (2011 - 2015), Convertible (2014 - 2015), C...

To ensure the correct clutch plate alignment on MINI 2005 - 2006 models, fitted with a 5 speed Getrag gearbox with 17mm clutch centre plate hole.Ap...

Designed to allow quick and simple release of the round style clutch and brake master cylinder reservoir caps used on BMW motorcycles.Applications ...

A mixed set of 8 sizes of clutch and accelerator springs.65.5mm overall length x 13.0mm OD; 64.0mm overall length x 15.7mm OD.89.0mm overall length...

Dual clutch removal and fitting kit for Ford DCT 250 gearbox. Use in conjunction with Laser 7821 when replacing the gearbox seals.Applications incl...

Ford 6 speed DPS6/6DCT250 (Powershift) twin plate dry clutch packs are supplied with transit hooks which are built in to the clutch unit. If the cl...

For the 7 speed DQ 380/81 and DQ 500 wet clutch units from the VW group. The 7999 is used to support the clutch pack during removal and refitting.U...

A/C compressor holding tool holds the compressor clutch in place when removing the holding bolt.Applications: Ford Fiesta (from 2008), C-Max (from ...

The Laser 8136 includes all the special tools required to remove and refit the wet style double clutch assembly found across the VW Group vehicle r...

A/C compressor clutch pulley holding tool. Designed to hold the compressor pulley still to allow the fixing bolt to be removed.Fits on to the A/C p...

A/C compressor clutch pulley holding tool. Designed to hold the pulley still to allow the fixing bolt to be removed.Fits on to the large hex of the...

DCT wet clutch oil seal fitting kit 2 pc for Ford and Volvo. Includes the seal guide and cover press to ensure the cover and seal are correctly fi...

Clutch retaining tool used to lock the clutch basket for VAG models with DSG 02E 6 speed transmissions.This tool is used to assist in the removal a...

Two piece set of centring mandrels for SAC clutches.Adjustable from 15 - 19mm and 20 - 26.6mm.Knurled screw easily expands diameter to fit most mod...

A useful tool for locking the clutch drum and centre together for easy tightening as well as the removal of the clutch centre nut.Application: BSA ...

The 7392 adaptor is specifically designed to screw into the plastic level/drain plug used on the latest VAG 7 speed DSG gearboxes. First seen on th...

Designed to help remove the clutch pedal from the clutch hydraulic master cylinder on late model VAG vehicles. Before removing the master cylinder ...

Allows the engine crankshaft position to be manually rotated.Applications: Volvo 6L and 12L engines.Covers engine codes: D9A, D12, D16C and FM 360 ...

Clutch bearing gauge block for use on DSG gearboxes in the Volkswagen Audi modelsApplication: DSG (7 speed) gearboxes found in the VAG range from 2...

This adjustable motorcycle clutch holding tool has been designed to clamp onto the outer gear of the inner hub to prevent it from moving. This then...