Power-Tec

Excellent for general pulling. Webbing body straps avoid marking and causing additional damage, and can be used in a variety of pulling situations,...

Trim clip removal pliers for the quick, easy and safe removal of trim clips without causing damage to the trim.Spring loaded pliers for trim remova...

The PowerTEC range of Professional Panel repair dollies, are manufactured from Induction Hardened, 1055 grade, medium carbon steel, which are then ...

Use to restore the natural contour of panel by raising or lowering defect as close as possible to original surface.Minimise amount of removal durin...

Robust scissor clamp with 3 tonne pulling capacity and 50mm jaws.50mm wide jaw.3 tonne pulling capacity.Painted finish for protection.Manufactured ...

Solvent spray for removing hot melt glue from body work.Dissolves glue on contact (release agent).Spray can 400ml.Made in Europe.

An easy way to mix standard paint cans by using pneumatic air compressor. Simply load the can, attach air and switch on. Bench fixings supplied.Sha...

Encapsulated in pressure moulded epoxy resin, this wire brush never clogs and will outlast conventional brushes. Complete with shank. Suitable for ...

Use to soak a spraygun for a thorough cleaning.Tank for soaking sprayguns to ensure thorough cleaning.Capacity: 13L.Quick & simple to use.Drop ...

50g of cold glue, suitable for use as part of a paintless dent repair (PDR) or automotive body repair. Used as an alternative to a hot glue system,...

Panel beating and fabrication shrinking hammer with rubber shock absorber and metal twist functions built in to the head. The rubber sandwich in th...

Cordless gas powered plastic welder developed to repair small to medium sized damage that could render a panel unusable. Suitable for repairing bum...

For use with Tack 'n' Pull, Part No. 91893, and a pulling system, these weld on plates are ideal for allowing hard to hold pulls.Size: 75 x 75mm.Pa...

This combined slide hammer and resistance welder cuts down on both repair time and consumables as it welds the tip directly onto the panel being re...

The Power-TEC Denibbing Tool is a fast and effective way to remove paint and clear coat imperfections, without the need for respraying. Its clever ...

A set of additional brackets for use with Power-TEC Part Nos. 92652 and 92653 to support smaller body and trim parts such as spoilers, mirrors, pet...

Flat grey plastic strips for use in plastic repair, on items such as bumpers, interior & under bonnet trim.Thermoplastic Polyolefin (TPO).Size:...

Holds squiggly wire in place during welding to ensure it's held down and in place.Avoid burnt fingers.Ensures good weld.Magnetic.Suitable for Squig...

100mm Self-locking clamp that avoids slippage. Speed up pulls and save valuable hook-up time by eliminating the need to bolt the clamp to the panel...

Separate spot welded and bonded panels easily with this tool.Sharpened on two edges for penetration between panels. Allows for impact to drive pane...

Steel pulling shaft for use with the Power-TEC Miracle System. The shaft is threaded through Miracle style bits before being attached to a line pul...

A steel extension pole specifically for use with the Power-TEC Pulling Tower (Part No. 92657), which adds an additional 700mm with 7 adjustable hei...

This paintless dent repair tool uses magnetic induction heating to remove soft edged dents like hail damage and carpark dings on automotive bodywor...

For mixing paint, plaster or other coatings.5 x 175mm long paint stirrers.Cut out feature in shaft allows paint to be stirred effectively.Side hook...