Laser

A set of driveshaft extractor forks designed to be used together or individually depending on the driveshaft/gearbox design being worked on.Designe...

A compact and powerful air blow gun kit that fits standard air compressors with 1/4 thread. Supplied with 7 extensions & nozzles to provide a c...

Twin joint spark plug connector pliers designed for the safe removal of deep seated, difficult to access spark plug connectors. Featuring a clever ...

Part of a range of vehicle specific tools for the removal and fitting of bushes and ball joints, without having to remove suspension legs, subframe...

When removing and refitting the Ford dry plate dual clutch units the clutch actuators must be reset. The Laser 8036 splined bit socket is designed ...

Ford 6 speed DPS6/6DCT250 (Powershift) twin plate dry clutch packs are supplied with transit hooks which are built in to the clutch unit. If the cl...

The Iveco Daily 35 utilises a removable stub-axle on the front hubs. This stub-axle is held in place by a castellated ring nut - the Laser 8034 is ...

The Ducati X Diavel was launched with belt final drive in 2016. Unlike chain drive, belt drive systems must be kept under tension on both top and b...

Five-curve diameter brake pipe bending former for copying existing brake pipe sections without the risk of creating damaging kinks in the new pipe....

High visibility safety lockout bag with lockable strap to prevent unauthorised access. Ideal for locking away vehicle keys, EV MSD's (Manual Servic...

Rectangular oil funnel kit with a screw on spout and an adaptor with tube for hard to reach areas. Sized to fit standard 1 litre oil bottles (142mm...

Manufactured from aluminium and fitted with twin radial seals to exactly mimic the standard vehicle pressure cap, the Laser 8027 is designed to scr...

Designed to separate the straight link ball joint found on the Volvo FM12 and FH series HGV's. The special shaped body allows the tool to fit aroun...

With integral cross brace to ensure the toothed socket is held securely in-line with the hub nut, the Laser 8024 has been designed to allow the hig...

The BMW S1000RR from 2015 was one of the first superbikes to be made publically available with Dynamic Damper Control (DDC). The use of DDC require...

Automatic curved jaw locking pliers, 7 times faster & twice as strong as normal grips. The 8022 locking pliers automatically adjust to the corr...

A fuel and additive funnel for use on diesel vehicles fitted with anti-misfuelling flaps, with a long neck design that opens the internal flap to a...

A fuel and additive funnel for use on petrol vehicles fitted with anti-misfuelling flaps, with a long neck design that opens the internal flap to a...

Automotive test, tune up and brake bleed vacuum pump with adaptor kit. Ideal for a wide variety of automotive applications.Applications for car and...

A 6 point, castellated socket designed to fit the ball joints used on Volvo B9, B11 and B12 bus and coach chassis.3/4"D, ID 100mm. Impact gun safe....

Specially designed to allow Laser Tools' pressure bleeders to be securely connected to the Tesla brake master cylinder reservoir to allow the techn...

Specially designed to allow Laser Tools' pressure bleeders to be securely connected to the Tesla brake master cylinder reservoir to allow the techn...

Some wheel nuts are manufactured with a permanently fitted chromium plated cap - these start off from the factory as a whole size, but over time du...

A professional workshop 'one battery powers all' cordless tool range with brushless motor technology built for daily use. The brushless motor works...