Laser

Designed to measure the pitch of the screw threads.Screw Pitch Gauge in Metric and Thread Per Inch (tpi) (SAE) measurements.Metric Sizes: 0.5mm, 0....

A heavy duty 3/4"D impact socket bit set in Hex and Star* profiles, with additional accessories.5 x 3/4"D Hex socket bits: 14, 17, 19, 21, 22mm.4 x...

Unique adjustable suction cup for increased suction.Maximum load: 120kg.Ideal for removing dents on car panels etc.Also suitable for lifting heavy ...

A comprehensive DTI (Dial Test indicator) gauge set, designed to be used for the accurate measurement of engine, brake and machine components. Accu...

Flushes cooling systems using workshop air and water.Hand held with five pipe size connections: 19, 29, 32, 36.5 and 40mm.Trigger action with locki...

The Subaru flat four engines listed below have 4 camshafts (2 per side) and replacing timing belts can be challenging when working alone. The 7685 ...

A comprehensive Spline bit set in two different lengths, with 3/8"D & 1/2"D impact bit adaptors.Spline bits x 30mm long: M4, M5, M6, M8, M9, M1...

Ideal for spot refinishing and smart repair. Supplied with a selection of discs, pads and polishing pads. Uses workshop air.90 angled head, dual ac...

Spot Weld Drill, fitted with removable clamp, ideal for steel, aluminium alloy plate and suitable for HSS and TCT drills.200mm long drill with remo...

Super light and compact air impact wrench with more than enough torque for everyday use.Patented design allows easy greasing with Molybdenum Disulp...

Small and lightweight but powerful impact wrench, with maximum torque 1100lb-ft (1492Nm).One piece Aluminium alloy die casting housing with black g...

Specifically designed for caravan leg winding.19mm socket end with 8mm drive Hex x 25mm long end.Diameter: 11.3mm; 300mm (12") shaft.Ideal for fast...

Laser Tools Racing Beanie Hat with built in 300mAh Lithium battery. Ideal for cyclists, vehicle inspection, dog walking and household repairs.Compl...

Developed to allow the safe removal and replacement of the camshaft drive chains and check the engine timing on the Range Rover and Range Rover Spo...

8 sided, 85mm hub nut socket designed for Scania hubs.Applications: Scania Hub Nut Socket.85mm across flats, 8 sided1"DImpact quality; power tool s...

Part of the Laser range of Wheel Nut removal tools. 18mm single hex, deep wheel nut socket, with thin wall design and plastic sleeve to prevent dam...

Most suspension strut top fixings require the top of the strut to be held while the fixing nut is removed. The design of the tools required for thi...

A set of ball end metric Hex 1/2"D sockets from 6mm to 19mm, provide greater access in confined spaces.1/2"D socket bits x 78mm long: 6, 8, 10, 12,...

A high performance propane blow torch with four interchangeable stainless steel tips, including pin-point, cyclone, soft flame and flameless hot ai...

Butane gas torch with flexible head and two heat level settings. The flexible head offers three operating positions (90, 135 & 180) which are a...

Metric tap & die set, from M3 to M12, with popular thread pitch combinations,including die wrench, two tap wrenches, and thread pitch gauge.Tap...

When working on common rail diesel (CRD) fuel systems it is essential to avoid dirt getting into the fuel system. It is important that the fuel rai...

To be used with Farm Jack - Part No 7665.Handle lock for Farm Jack - Part No 7665.

To be used with Farm Jack 1200mm - Part No 7665.Off-Road support base for use with Farm Jack - Part No 7665.Useful when the ground is not secure or...