Laser

Tyre / wheel / barrel truck for wheel & tyre sizes from 10" to 18". Also suitable for moving 205L barrels or fluid drums.Tyre, wheel & barr...

When pressure bleeding brakes and clutch hydraulic systems, it is essential to prevent fluid and air being pulled back into the system via the blee...

An extractor set for removing damaged Torx and Hex fittings.7 x 1/4"D x 50mm long extractor bits for Hex drive: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm an...

For installing the stretchy type water pump belt on PSA and Vauxhall vehicles. Fit the tool to the water pump pulley and turn the engine by the cra...

Designed to allow the engine timing to be set and checked on the Audi and Volkswagen 3.0 TDI diesel engines listed. The 7588 is a 7 piece kit which...

44mm single hex (6 pt) deep 3/4"D impact socket suitable for Citron, Peugeot, Toyota Proace Van ball joints (from 2016).Applications include: Citr...

T-handle slot driver for the film/video industry - ideal for camera tie down screws etc.Specifically designed to prevent damage to camera and attac...

Engine timing tool kit specifically designed for the Audi 4.0L TFSI petrol engines to lock the engines in their timed position so the camshaft driv...

Diesel injector sleeve remover for Isuzu Trooper.Application: Isuzu Trooper.Engine: 4JX1 3.0L diesel engine (1998 to 2004).Equivalent to OEM ATET01...

Especially designed for removing and installing fuel filters.Applications: Vauxhall Vectra C, Signum, Astra H, Corsa C, Combo, Meriva; Fiat, Alfa ...

Part of a range of vehicle specific tools for the removal and fitting of bushes and ball joints without having to remove suspension legs, subframes...

Hose clip fitting tool for clipless, pre-opened spring band clamps.Used to release the pre-tensioned clips when clamping the coolant hoses.Equivale...

An individual 1/2"D Star* socket bit, T50.Size: T50 x 1/2"D.Length: 100mm.Range of sizes available from T20 - T50.Socket manufactured from chrome v...

To remove the left hand side final drive pinion casing cover from the Honda VFR 1200 a special 56mm 12 point bit is required. The Laser 8031 has be...

A 19mm 1/2"D deep socket, suitable for use in a Unistrut type channel.Deep Socket for Unistrut type channel fixing bolts.Size: 19mm x 1/2"D; length...

Viscous coupling removal spanners, specially designed for the removal of the viscous coupling fan on the current rear wheel drive and four wheel dr...

AdBlue tank cap remover for removing the tank cap when stuck due to urea crystallisation or overtightening.AdBlue tank cap remover for Citron and P...

Many modern torque applications require a torque and angle setting to be applied. Traditionally this means the use of 2 separate devices, including...

A kit of essential safety requirements for technicians, to be used when shutting down and disconnecting the high voltage system on Hybrid (PHEV) an...

Heavy duty wheel nut cap remover pliers. Adjustable to 2 sizes for HGV wheel nut (lug nut) covers.Adjustable to give a wide size range, to easily c...

These L shaped Hex Keys each feature a long shaft with a ball end tip allowing for greater access to difficult and otherwise hard to reach screws, ...

3/8"D mini ratchet head for use with 3/8"D accessories, ideal for tight or restricted access applications. Allows standard sockets to be used as an...

Heavy duty locking pliers with serrated gripping surfaces and a wide adjustable opening, they feature large curved shaped jaws suitable for grippin...

This short series Oxygen sensor socket is used for the removal and installation of Oxygen or Lambda sensors. It features a slot in the side, enabli...