Thread & Bearing Tools

Designed for use with a workshop vice, the Laser vice jaw inserts protect polished or coated vehicle parts from the unnecessary marring usually ass...

For use on M17 sumps where the thread has been stripped or worn. The tap will also fit Oxygen Sensors.Contains: 1 x M18 x 1.5 tap, 6 sump plugs and...

For use on M13 sumps where the thread has been stripped or worn.Contains: 1 x M14 x 1.25 tap, 6 sump plugs, 6 copper washers.Applications: Citroen,...

A 3/8" drive spark plug thread chaser designed to clean and restore spark plug bore threads. Low, narrow profile and longer length makes it ideal f...

The Laser 8446 wheel bearing kit has been specifically designed to allow the Mercedes-Benz Viano and Vito rear wheel bearings to be removed and fit...

The rear wheel bearings found on the listed vehicles come from the factory with a GEN2 design wheel bearing that has no centre hole, making removal...

For use on M21 sumps where the thread has been stripped or worn.Contains 1 x M22 x 1.5 tap, 6 sump plugs and 12 copper washers.Always use one size ...

For use on M19 sumps where the thread has been stripped or worn.Contains 1 x M20 x 1.5 tap, 6 sump plugs and 12 copper washers.Always use one size ...

For use on M16 sumps where the thread has been stripped or worn.Contains: 1 x M17 x 1.5 tap, 6 drain plugs and 12 copper washers.Always use one siz...

For use on M14 sumps where the thread has been stripped or worn.Contains: 1 x M15 x 1.5 tap, 6 drain plugs and 12 copper washers.Always use one siz...

For use on M12 sumps where the thread has been stripped or worn.Contains: one M13x1.25 tap, six M13x1.25 drain plugs and 12 copper washers.Always u...

For use on M12 sumps where the thread has been stripped or worn.Contains: 1 x M13 x 1.5 tap, 6 drain plugs, 12 copper washers.Always use one size l...

For repairing damaged wheel stud threads using a reverse action to ensure the alignment of the thread.For repairing damaged wheel stud threads.Size...

A set of repair taps and coils for repairing the threads and glow plugs on alloy cylinder heads.Re-threading kit for 8mm, 10mm, 12mm glow plugs.Man...

Wheel stud master re-threader kit for use on vehicles that use wheel boltsFor repairing damaged wheel stud threads internal and external on most pa...

Screw the appropriate guide into the sump and use the cutter to re-surface the seal area of the sump.Applications include: Alfa Romeo, Audi, Cadill...

Designed for the repair of damaged Lambda (oxygen) sensors threads.Set includes: 5 x thread repair inserts M18 x 1.5.M18 x 1.5 taper tap & M20 ...

Generation II (GEN2) type wheel bearings consist of a combined bearing and drive flange (hub), which cannot be separated, therefore require special...

Internal bearing puller suitable for the extraction of bearings that require pulling, not pressing, out.Diameter of adapters: 8, 10mm x 100mm; 12, ...

The Mercedes-Benz CDi injector clamping bolts can be prone to seizing in place and can often break when being removed. This kit provides the specia...

Modern engine design has seen the glow plugs threads becoming more recessed into the cylinder heads making the repairing of damaged threads more di...

This Laser Tools Glow Plug Threaded Insert kit has been developed to allow the repair of an engines glow plug threads as easily as possible with th...

This Laser Tools Glow Plug Threaded Insert kit has been developed to allow the repair of an engines glow plug threads as easily as possible with th...

This Laser Tools Glow Plug Threaded Insert kit has been developed to allow the repair of an engines glow plug threads as easily as possible with th...