Sealey

Locate and isolate ECU signal faults fast. Noid and idle air control valve indicator lights test for control signal from ECU. Simply disconnect har...

Check fuel injector signal faults fast. Simply disconnect injector harness and plug in noid light. Turn the ignition on - if the light is steady or...

Operates injectors individually to diagnose fuel delivery problems on petrol vehicles with electronic fuel injection. Works with engine off and pul...

Replacement M20 sump plug washer. Suitable as a refill for Model No. VS660 Drain Plug Thread Repair Kit. Supplied in packs of five.Replacement M20 ...

Replacement M20 sump plug. Suitable as a refill for Model No. VS660 Drain Plug Thread Repair Kit. Supplied in packs of five.Replacement M20 sump pl...

One of the most comprehensive balancer sets available on the market. Features a bank of four mini-gauges with lockable valves enabling user to hold...

Professional low cost tool saves all the vehicle settings to prevent loss and expensive reprogramming not just for radio codes but for immobilisers...

Attaches to a 12V slave battery and provides power via the EOBD socket to on-board electronics whilst vehicles own battery is disconnected. Feature...

Suitable for repairs on Bosch, Denso and Siemens injectors. 6.6, 7.6mm Hex security bits 20mm Hex/1/2"Sq Drive. 16mm 8-sided socket for Bosch commo...

Extracts petrol injectors easily without damaging the injector or head. Includes slide hammer and specially designed injector claw. Equivalent to O...

Suitable for the removal of Bosch, Delphi, Denso, Siemens and Pumpe Duse diesel injectors. Set includes keys and deep open profile sockets, used to...

Suitable for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors. Set includes keys and deep open profile sockets, used ...

Enables the testing of injectors under pressure. Fitted with 88mm gauge with rubber bumper reading both psi and bar. Ideal for checking of atomisat...

Specially designed for the removal of stubborn diesel injectors fitted on Mercedes CDi engines. Features injector cap removal socket, security hex ...

Set of seven diesel injector seat cleaners, ream, centring pilot and T-handle. Used to clean/decarbonise injector seats when changing injectors. He...

Designed to remove the copper injector seal when it has stuck into the head. Adjusts to allow seals with 6.7-8.7mm internal diameter to be removed....

Makes one-person operation possible for a variety of under the bonnet tasks. Connects to starter system with leads provided and allows push-button ...

Suitable for the removal of stubborn Bosch/Delphi diesel injectors. Set includes two adaptors for different removal methods. The first screws onto ...

Updated kit designed to measure return fuel flow on diesel vehicles up to 6-cylinders, fitted with common rail injection system. Identifies worn, b...

Designed to measure return fuel flow on diesel vehicles up to 6-cylinders fitted with common rail injection system. Identifies worn, blocked or ino...

The extensive range of glow plug and injector adaptors enable this kit to cover the vast majority of car, van, truck, bus, agricultural and marine ...

Designed to aid the removal of diesel injectors, limiting the risk of damage to injector and cylinder head. Set includes female adaptor for 12mm x ...

Specially designed spanner and split deep socket to assist in the removal, fitting and adjusting the turbo pressure capsule and turbo actuator on V...

Enables user to disconnect electrical connectors quick and easy without causing damage. Double ended design allows access at different angles. Can ...