Laser

For upper ball joint on front suspension for Citroen / Peugeot, right and left hand.Applications: Citroen C5 III (2008 - 2017) - 2nd Generation X7 ...

An impact quality hub locknut socket for SAF trailer axles; 36mm hex drive.Hub nut socket for SAF Trailer axles36mm Hex Drive6 point x 85mmImpact q...

A hub locknut socket for Scania 420 vehicles; 3/4" drive.Hub nut socket for Scania 420.8 teeth profile. Teeth: 10mm x 8mm x 12mm deep.ID: 90mm; OD:...

Camshaft VVT actuator wrench for BMW, used to replace leaking actuator seals or when the camshaft requires removal. The wrench is designed to latch...

Ratcheting tap wrench with forward, reverse, and locking action.Size range: 3 - 10mm.Length: 300mm.24 teeth ratchet with forward & reverse.3/8"...

Designed to quickly and easily replace the injector tube seals found on the DV6 1.6L 16v diesel engines that are used across the Citroen, Fiat, For...

Injection pump remover and installer for Ford 2.0 EcoBlue diesel.Applications: Ford Transit, Transit Custom and Tourneo Custom with 2.0L Ecoblue TD...

This timing kit has been designed for the latest Ford 2.0D EcoBlue TDCi engine which features an innovative belt in oil design where the synchronou...

Welding screen/curtain 1.74 x 2.34m flame retardant, waterproof, manufactured to EN1598 with castors.Welding screen/curtain manufactured in 0.4mm/0...

Motorcycle fork damper holding tool 13.3 to 14.3mm. Use with Laser 6353 fork spring compressors.This holding tool is used in conjunction with the L...

Motorcycle fork damper holding tool 10.3 to 12.7mm. Use with Laser 6353 fork spring compressorsThis holding tool is used in conjunction with Laser ...

When there is reason to access the front of the Ford 1.1L non-turbo and 1.0L EcoBoost engine to remove the pulley, when changing the timing belt o...

Camshaft holding tools for Mercedes V6 and V8 petrol engines to hold the camshaft in place while setting the timing.Vehicle applications include V6...

Heavy duty ratcheting type crimping pliers designed for crimping copper tube terminals. The ratchet motion produces precise results quickly and eas...

Designed to set the engine timing on the BMW M3 S65 engine found in the M3 from 2007 to 2013.Applications: BMW 3 Series (2007 - 2013)Engine codes: ...

Valve clearance tool for Ducati used to measure the valve shims on models fitted with 7mm valve stems.Used to measure the valve shims on Ducati mod...

Miniature socket and bit set, with 4mm to 13mm satin finish chrome vanadium sockets and colour coded S2 impact grade steel bits, in innovative fold...

Designed to undo the camshaft pulley fixings.Application: older Ducati motorcycles.Drive: 19mm Hex; ID: 17mm; 21.25mm across the flatsManufactured ...

Designed to undo the camshaft pulley fixings.Applications: Ducati 748 and 916 series.Drive: 19mm Hex; ID: 17mm; 20.24mm across the flats.Manufactur...

Designed to undo the camshaft pulley fixings.Applications: Ducati 749, 999, 1098, 848 and 1198 series.Drive: 19mm Hex.Manufactured from Stainless S...

A clamping tool required to safely remove the intermediate shaft control springs used on the VVT system found on BMW petrol engines.Applications in...

1/4"D ball end Hex bit socket, designed for removing/installing the engine speed sensor on VAG engines.For removing/installing engine speed sensor ...

Fuel tank locking ring tool for Citroen and Peugeot designed for removal and installation.Applications: Citroen and Peugeot.Size: 175mm X 1/2"D.Des...

Oil pump remover/installer set for various BMW models, including; 1 series, 2 series, 3 series, 4 series, 5 Series.Applications: BMW 1 Series (2012...