Laser

1/4"D socket driver with both fixed and off-line function for hard to reach areas.Quick chuck end 1/4"D.Enables 1/4"D sockets to be used with a cor...

Bit holder with both fixed and off-line function for hard to reach areas.Quick chuck end 1/4" Hex.Suitable for 1/4" Hex screwdriver bits (50mm or l...

A 3 part tool which can be used individually for spinning off sockets, or as step-up convertors.Convertor: 1/4"D to 3/8"D to 1/2"D to 3/4"D.Knurled...

A 14mm Bi-Hex (12pt) 3/8" drive spark plug socket with longer than standard length barrel, narrow walls and wobble joint head designed to fit the n...

A thin wall, 16mm single Hex (6pt) 3/8" drive spark plug socket. The slim diameter is ideal for the narrow modern spark plug recesses found in mode...

A high quality tapered (taper approx. 16-18mm) reamer for ABS sensor housings on MAN vehicles; 16mm hex drive.For removing dirt and corrosion build...

A cup style oil filter wrench suitable for use on Honda, Infiniti, Kia, Mazda, Mitsubishi, Smart and Subaru vehicles, removes filters without damag...

Required when replacing timing belts or performing any cylinder head repair and maintenance work.Applications: Hypermotard 1100, 1100 EVO, 1100 EVO...

Required when replacing timing belts or performing any cylinder head repair or maintenance work. Specifically designed for the 2 valve 620cc, 695, ...

For the removal and installation of the fork cap, without damaging or marring it.Applications: Ducati Monster 1100, 1100S (2009 - 2010); Multistrad...

8 pin aluminium fork cap socket with steel pins, allows damage free removal and installation of the fork cap socket.Applications: Ducati 1199R, 119...

Aluminium fork cap socket with 6 steel pins for removing or installing the fork cap without marring or damage.Applications: Ducati 1199 and Hypermo...

Used to lock the camshafts in their timed position when replacing the cam belts and cam drive pulleys.Covers 3 valve models from 2005 to 2007.Size:...

Crankshaft reset tool to lock the crank at TDC when changing cambelts.Applications: Ducati Diavel AMG, Carbon, Cromo and Standard (2012 - 2015); Hy...

Screw the appropriate guide into the sump and use the cutter to re-surface the seal area of the sump.Applications include: Alfa Romeo, Audi, Cadill...

Impact quality socket, ideal for use on over-tightened or seized rear wheel nuts on Ducati or Triumph models.Applications: Ducati 748 ,848, 916, 99...

Part of a range of vehicle specific tools, for the removal and fitting of bushes and ball joints, without having to remove suspension legs, subfram...

This motorcycle fork spring compressor has been designed for use on both Triumph and Ducati motorcycles. Essential for the assembly and disassembly...

Used to extract motorcycle flywheel/alternators from the crankshaft taper.A combination tool that combines the 6 most common alternator/flywheel th...

Allows rotation of the front axle to align the fork adjuster holes allowing suspension adjustments to be made with the axle in-situ.Applications: D...

A two piece tool set for installation of the stretchy auxiliary belt on BMW vehicles, intended as a substitute for the OE tools. Anodised aluminium...

10 sided fork cap socket to remove or install the fork cap without marring or damage.Applications: all Ducati Multistrada 1200 models fitted with S...

Two piece kit consisting of the components required to lock the crankshaft and camshafts in their timed positions to allow the removal and replacem...

Prop shaft bearing nut socket for the removal and installation of the bearing nut on DAF commercial vehicles.Application: DAF XLR (EURO4).3/4" Driv...