Laser

Designed to hold the crankshaft pulley stationary while loosening or tightening the centre bolts of the crankshaft. The tool locks onto the inner p...

A drill guide kit to assist correctly and safely drill out broken M8 and M10 studs and bolts. Ideal for use on exhaust manifolds, inlet manifolds, ...

This kit is for the FSI VAG petrol engines fitted to Audi, Seat, Skoda and Volkswagen models including the 1.4L cylinder on demand (CoD) engine. Th...

For restoring fuel injectors immediately after calibration of the sealing rings.Engine applications: M133, M152, M157, M270, M274, M276 and M278.Eq...

Designed for removing the petrol injector using a slide hammer or T bar on 4.6 to 5.5 litre petrol engines.Engine applications: M133, M152, M157, ...

Allows safe removal of the airbag without risk of damage to other components.Applications: Vauxhall/Opel Insignia and Astra (from 2008).Before remo...

3/8"D wobble drive ratchet for difficult access situations.48 teeth ratchet mechanism.3/8" drive.Forward and reverse function.Manufactured from pol...

For the removal and installation of the axle joint track rod from the steering rack.Includes three seperate heads: 30 - 35mm, 35 - 40mm and 40 - 45...

A set of 3 Ribe profile sockets for clutches, cylinder heads and balance shaft fixings etc.Applications: Nissan and Renault.Sizes: 6S, 8S and 12S.1...

For removing and installing the plastic sump plug fitted to plastic sumps on VAG 1.8 and 2.0L TSI and TFSI petrol engines.Applications: VAG 2.0L 4 ...

Designed to help remove the clutch pedal from the clutch hydraulic master cylinder on late model VAG vehicles. Before removing the master cylinder ...

For removing stubborn radiator coolant reservoir caps.Applications: BMW vehicles (from 2006).3/8"D.Three arms for grip.Manufactured from non markin...

Three actions in one simple kit - drill, tap and deburr.Sizes: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25 and M10 x 1.5.Overall length: 55mm...

Ideal for small dents, lifting and positioning tiles, glass and marble. Also good for holding wing mirrors.Diameter: 90mm.Max lifting capacity: 10k...

From 1990 to 2006 the VAG 2.5L TDI and SDI diesel engines appeared in the VAG commercial van range. This kit provides the essential setting and hol...

This kit provides the specially shaped camshaft and crankshaft locking pins that are essential for replacing the cambelt on the Citroen and Peugeot...

Essential camshaft and crankshaft setting pins to allow the replacement of the camshaft drive belt on the Volvo developed 2.0 and 2.5L 5 cylinder d...

The 6563 kit contains the essential camshaft, crankshaft and guide pulley tools for 1.4/1.6L DOHC Renault developed petrol engines. The K4J and K4M...

Provides the essential tools required to change the camshaft drive belt on the 1.4, 1.6, 1.8 DOHC 16V petrol engines found in the Opel/Vauxhall, Sa...

The essential camshaft and crankshaft alignment tools for the popular 1.25, 1.4 and 1.6L Ford developed petrol engines. This kit includes the align...

A small but essential kit for setting the camshafts and tensioner on the popular 1.6 and 2.0L petrol engines found across the VAG ranges from 1997....

A small but essential kit for setting the camshafts and tensioner on the popular 1.4 and 1.6L FSI petrol engines found across the VAG ranges from 1...

This kit provides the tools to set the camshafts and crankshaft when replacing the cambelt; also includes a front pulley holding tool which is esse...

Suitable for most types of hose clamps including Spring Clips. Side profile is also suitable for re-useable clips.Clamp size range: 2 - 52mm.One h...