Engine Tools

Designed to fit LGV and HGV ball joints. Supplied with 3 different length pressure pieces and a threaded adaptor which allows the use of a hydrauli...

Part of a range of vehicle specific tools, for the removal and fitting of bushes and ball joints, without having to remove suspension legs, subfram...

An innovative, dual drive - 3/8"D or 17mm Hex - single Hex socket set that allows access to confined areas but still offers the ratchet and Go Thru...

Chemically blackened forged steel body with thrust bolt. High strength construction, suitable for commercial vehicle ball joints.Chemically blacken...

Chemically blackened forged steel body with thrust bolt. High strength construction, suitable for splitting commercial vehicle ball joints.Chemical...

Low profile set suitable for most modern vehicles. Three sizes of jaw allow use on most cars and light commercial vehicles. Features heavy-duty for...

Forged steel body, ball joint splitter suitable for light commercial vehicles. Specially designed to be operated manually or by 1.5 Tonne hydraulic...

Heavy-duty ball joint splitter suitable for commercial vehicles. Specially designed to be operated manually or by 10 Tonne hydraulic ram (supplied)...

Chemically blackened forged steel body with thrust bolt. Suitable for commercial applications.Chemically blackened forged steel body with thrust bo...

Heavy-duty ball joint splitter with interchangeable jaws. Enables operator to select correct jaw size without taking entire splitter to the vehicle...

Suitable for removal and installation of spring and shock strut from steering knuckle. Prevents expensive damage to aluminium or cast iron steering...

Designed to remove and install press-fit rear suspension ball joints in situ, on BMW 5 and 7 Series. These joints are sometimes referred to as 'bus...

Suitable for the in situ removal and installation of front lower ball joints on Mercedes W220, W211, W230 and Renault Megane. No need to disassembl...

Suitable for removing and installing the upper front ball joint in situ without the need to disassemble. Features various adaptors used in differen...

This three piece set is suitable for use in confined spaces and on a number of makes of vehicle including Audi, BMW, Ford, Chrysler, Opel, Saab, Vo...

Required for turning and releasing the lower ball joint to free corrosion etc.Applications: Audi A4 (from 2007), A5 (from 2009), A6 (from 2011), A7...

Large sized fork and wedge type ball joint breaker, internal jaw size 35mm for larger ball joints as fitted to light commercials' and 4x4.Jaw width...

Part of a range of vehicle specific tools, for the removal and fitting of bushes and ball joints, without having to remove suspension legs, subfram...

Part of a range of vehicle specific tools, for the removal and fitting of bushes and ball joints, without having to remove suspension legs, subfram...

Multipurpose ball joint dust covers easily replace split or damaged dust covers on otherwise serviceable ball joints, avoiding MOT test failure. Pa...

This front axle ball joint extractor/installer can be used insitu, saving valuable time and money.Specifically designed for Volkswagen Transporter ...

Heat treated alloy steel socket. 35mm Hex drive with 19mm internal clearance for OEM and non-OEM fittings. 50mm Ring with drive pegs which locate i...

Multipurpose ball joint dust covers easily replace split or damaged dust covers on otherwise serviceable ball joints, avoiding MOT test failure. Pa...

Set of two heat treated alloy steel sockets. Suitable for removal of OEM and aftermarket lower ball joints on Citroen and Peugeot vehicles. Supplie...