Clutch Tools

Assists with the removal and replacement of large clutch spring nuts on most classic British motorcycles.Applications: BSA, Triumph and pre-unit No...

Adjustable pin wrench set 2.5mm to 9mm, for pin drive bearing seal retainers.Pin diameters: 2.5, 3, 4, 5, 6, 7, 8 and 9mm; wrench length: 245mm; ca...

The 7392 adaptor is specifically designed to screw into the plastic level/drain plug used on the latest VAG 7 speed DSG gearboxes. First seen on th...

Clutch retaining tool used to lock the clutch basket for VAG models with DSG 02E 6 speed transmissions.This tool is used to assist in the removal a...

Two piece set of centring mandrels for SAC clutches.Adjustable from 15 - 19mm and 20 - 26.6mm.Knurled screw easily expands diameter to fit most mod...

An essential tool for pulling the clutch hub front from its taper on the main shaft.Applications: Triumph 500, 650 and 750cc; BSA 500 and 650 Twins...

A useful tool for locking the clutch drum and centre together for easy tightening as well as the removal of the clutch centre nut.Application: BSA ...

Clutch bearing gauge block for use on DSG gearboxes in the Volkswagen Audi modelsApplication: DSG (7 speed) gearboxes found in the VAG range from 2...

Designed to help remove the clutch pedal from the clutch hydraulic master cylinder on late model VAG vehicles. Before removing the master cylinder ...

Allows the engine crankshaft position to be manually rotated.Applications: Volvo 6L and 12L engines.Covers engine codes: D9A, D12, D16C and FM 360 ...

This adjustable motorcycle clutch holding tool has been designed to clamp onto the outer gear of the inner hub to prevent it from moving. This then...

SAC clutch mandrel kit for centring the clutch disc on the flywheel while installing the self adjusting clutch.Applications: BMW vehicles.Can also ...

Dual clutch alignment tool used to align the clutch plates for removal from the gearbox case. Tool must be fully inserted into clutch plate unit be...

Clutch jack for flywheel removal and installation, designed to remove, install and transport (in the lowered position) 14" and 15" double-disc clut...

Universal Clutch alignment tools for assembling and installing both single and double disc clutches on HGVs.Contents: 4 x steel adaptors: 20, 25, 2...

The Ford and Volvo 6 speed dual clutch transmission is unique, incorporating a dog-clutch between the engine flywheel and the clutch mechanism. Thi...

A clutch cover compressor tool for BMW that allows the clutch cover to be compressed either on or off the vehicle, allowing the clutch cover to be ...

Combined clutch alignment kit that includes the BMW style short clutch plate alignment tools and more traditional centre plate alignment tools for ...

DSG clutch removal tool set for VAG 7 speed gear boxes found in Audi A3, Volkswagen Golf and Touareg. NB, Gen 2 clutches (fitted from 06/2011 onwar...

The DCT (Dual Clutch Transmission) clutch tool is designed to allow the removal of the clutch housing complete with clutch plates from the Getrag 6...

Clutch alignment tool specifically designed to hold the clutch centre plate centred on the flywheel while fitting the clutch cover plate.Designed f...

Service tool designed for holding the clutch basket on Ducati 6 speed, dry plate clutches.Applications: Super Sport 800, 900, 750 and 1000SS (from ...

For easy alignment of single plate clutches.Suitable for flywheels with or without pilot bearing.3 adaptors for range of collet sizes: 14 - 28mm.Co...