Products

A set comprising driveshaft puller and 6 adaptors, designed for pulling drive shafts into hubs on Audi, BMW, Fiat, Ford, Mercedes-Benz, Peugeot, Po...

Drive shaft socket for Audi A4/A63/4"D x 45mm.Application: Audi A4 2001, Audi A6 2005.For drive shaft nuts on 6 speed gear box (4WD).Length 124mm (...

Drive shaft wedge used to push the drive shaft out on the 6 speed automatic O9G transmission.Specially designed to push the drive axle out from the...

Removal tool with soft grip handle, for DZUS quarter turn fasteners.Quarter turn fasteners are widely used in motorsport, kit cars, classic cars, m...

This tool is designed to allow the brake wheel cylinder to be removed without removing the brake shoes or climbing in the car to apply the hand br...

Soft-grip drum brake spring pliers used for re-fitting or installing the brake shoe springs.For use on light and heavy goods vehicles.Length 300mm....

For the removal of drum brake return springs215mm long. Maximum jaw opening 130mm.Can be used on most car and light commercial drum brakes.One end ...

Dry wall bit holder and bit set contains a drywall bit holder and 4 Ph2 bits.For use on plasterboard to prevent the screw going below the surface o...

For use when installing plasterboard, or drywall, each of these Ph2 screwdriver bits has a rotating plastic guard with bevelled edges to ensure the...

Clutch bearing gauge block for use on DSG gearboxes in the Volkswagen Audi modelsApplication: DSG (7 speed) gearboxes found in the VAG range from 2...

DSG clutch removal tool set for VAG 7 speed gear boxes found in Audi A3, Volkswagen Golf and Touareg. NB, Gen 2 clutches (fitted from 06/2011 onwar...

Designed to speed up and simplify the fitting of DSG clutch kits to GEN1 and GEN2 DSG transmission systems, the 7914 has been specifically designed...

Dual clutch alignment tool used to align the clutch plates for removal from the gearbox case. Tool must be fully inserted into clutch plate unit be...

Clutch seal remover and installer set for Ford Fiesta and Focus. NOTE: The removal of the seals requires the careful removal of the clutch pack. Fo...

Dual clutch removal and fitting kit for Ford DCT 250 gearbox. Use in conjunction with Laser 7821 when replacing the gearbox seals.Applications incl...

Ford 6 speed DPS6/6DCT250 (Powershift) twin plate dry clutch packs are supplied with transit hooks which are built in to the clutch unit. If the cl...

A two piece double threaded adaptor that attaches to both inner and outer threads on the injector body to allow the use of a slide hammer. By conn...

A 9 piece dual drive Hex impact bit set that allows the bit to be driven either via 1/2"D or 3/8D power tools or wrenches. The 17mm Hex on the end ...

Dual-drive spline impact bit set with adaptor and locking coupler offering the option of 1/2" and 3/8 drives. The bits also have a 17mm Hex (6pt) h...

A 9 piece dual drive Star* impact bit set that allows the bit to be driven either via 1/2"D or 3/8D power tools or wrenches. The 17mm Hex on the en...

An individual diesel compression test adaptor (dummy glow plugs) for use with Laser compression and cylinder leakage kits (Part Nos. 2596, 4510 and...

A pack of 5 black tyre value dust caps (also known as value caps), to help prevent dirt and other contaminants from getting into the tyre.Pack of 5...

Clip tool suitable for use with for E and C type clips, featuring a magnetic clip holder together with an ergonomic handle with a pound through des...

Five-piece set of flexi shaft E-Sockets in a complete range of sizes from E4 to E8. The flexible shaft is ideal for automotive applications when ac...